TARGET® 1121 Cable Duct Grout is a premium quality, high flow, unsanded, cementitious grout. It is specially formulated for the grouting of stressed cables, bars and anchorages. It is designed to exceed the stringent requirements of PTI M55. It does not depend upon the formation of hydrogen, carbon monoxide, air or the use of gypsum for pre-hardened and post hardened expansion.

Used For:

• It is specially designed for uses where high fluidity, extended working time, no bleeding, segregation or plastic settlement shrinkage, high strength and resistance to chloride penetration are required.
• Applications include: Grouting of post-tensioning cables or bars where complete encapsulation of the reinforcing and protection from corrosion are required.
• Pumping grout through small opening over long distances.
• Grouting cable anchorages for highly stressed reinforcing steel.

Features:

• It is specially designed for uses where high fluidity, extended working time, no bleeding, segregation or plastic settlement shrinkage, high strength and resistance to chloride penetration are required.

Yield/Coverage (per 25 kg bag at fluid consistency):

• bags/m³ = 63
• bags/yd³ =48
• litres/bag =15.8
• ft³/bag = 0.56

Available In:

• 25 kg (55 lb) 56 bags/pallet